Page 2759 of 3261

Re: What is in the post? welcome to GWA: gear whores anonymo

Posted: Thu Sep 28, 2017 5:50 pm
by D.o.S.
I wouldn't skimp on contact mics if I were you. Hunt down a Barcus Berry pre-amp. :thumb:

Re: What is in the post? welcome to GWA: gear whores anonymo

Posted: Thu Sep 28, 2017 5:56 pm
by Ruiner
D.o.S. wrote:I wouldn't skimp on contact mics if I were you. Hunt down a Barcus Berry pre-amp. :thumb:
Actually ordered this:

Image

although i didn't get the preamp with it.... is there a reason i would want to? I figured i could just hook it up to my Electronaut M67 preamp and run it through some tubes for color that way too.

Re: What is in the post? welcome to GWA: gear whores anonymo

Posted: Thu Sep 28, 2017 6:06 pm
by Ugly Nora
worra wrote:
UglyCasanova wrote:Sprinkle, sprinkle.
I mean, it's a $250 piece of scrap metal. I think it's warranted.
It's a hand-hammered piece of metal. It took a lot more work to make that than it did to make a $300 boutique fuzz pedal clone. This guy make neato stuff. I would like to get some of his gamelan strips or bar thingies.

[youtube]http://www.youtube.com/watch?v=esjNwb_6Mkk[/youtube]

[youtube]http://www.youtube.com/watch?v=vKWcxSXjdEI[/youtube]

Re: What is in the post? welcome to GWA: gear whores anonymo

Posted: Thu Sep 28, 2017 6:08 pm
by Invisible Man
codetocontra wrote:If you pick up the Mega Marvin you can start putting houses on Ventnor Ave. Then hotels later.
This post is not getting the attention it deserves.

Also have a bag of Chinese contact mics. Shit, I've gotta find them and get some heatshrink.

I am getting closer to my electro-gamelan synth controlled by acoustic drums. Laying out my tabletop control stuff today.

Re: What is in the post? welcome to GWA: gear whores anonymo

Posted: Thu Sep 28, 2017 6:09 pm
by Ruiner
Ugly Nora wrote:
worra wrote:
I would like to get some of his gamelan strips or bar thingies.
Yeah, i've been looking at those too. Thinking about getting a few strips or octagongs to try out....... maybe just start out with D minor :lol:

Re: What is in the post? welcome to GWA: gear whores anonymo

Posted: Thu Sep 28, 2017 6:37 pm
by D.o.S.
Ruiner wrote:
D.o.S. wrote:I wouldn't skimp on contact mics if I were you. Hunt down a Barcus Berry pre-amp. :thumb:
Actually ordered this:

Image

although i didn't get the preamp with it.... is there a reason i would want to? I figured i could just hook it up to my Electronaut M67 preamp and run it through some tubes for color that way too.
Not to get all "you just went full 'what's a VCA ' again" but You need a piezo pre-amp or it's going to sound like shit. It's an impedance thing.

You literally just bought the least essential element. :lol:

Re: What is in the post? welcome to GWA: gear whores anonymo

Posted: Thu Sep 28, 2017 6:44 pm
by Ruiner
D.o.S. wrote:
Ruiner wrote:
D.o.S. wrote:I wouldn't skimp on contact mics if I were you. Hunt down a Barcus Berry pre-amp. :thumb:
Actually ordered this:

Image

although i didn't get the preamp with it.... is there a reason i would want to? I figured i could just hook it up to my Electronaut M67 preamp and run it through some tubes for color that way too.
Not to get all "you just went full 'what's a VCA ' again" but You need a piezo pre-amp or it's going to sound like shit. It's an impedance thing.

You literally just bought the least essential element. :lol:
:lol: ok so I'll just run my preamp through a VCA. Problem solved!

Re: What is in the post? welcome to GWA: gear whores anonymo

Posted: Thu Sep 28, 2017 6:49 pm
by chrisdermo
I dig the clip too. Did think it was a bit pricey but also assumed it was a modified cowbell not a completely hand beaten construct. Along with Nora's incoming electrolobotomy piece you guys are making me wanna dig out my contact mics as well. :yay: had been planning on using them with the microgranny anyways, hopefully this will give me the push to get on with it!

Re: What is in the post? welcome to GWA: gear whores anonymo

Posted: Thu Sep 28, 2017 6:55 pm
by Ruiner

Re: What is in the post? welcome to GWA: gear whores anonymo

Posted: Thu Sep 28, 2017 8:01 pm
by Jwar
Have a few things incoming...

The Have You Ever Been Fucked by a Rainbow is a pedal Brian made me years ago and it's finally coming home! :)
Image

Re: What is in the post? welcome to GWA: gear whores anonymo

Posted: Thu Sep 28, 2017 9:23 pm
by Mudfuzz
Ruiner wrote:
D.o.S. wrote:
Ruiner wrote:
D.o.S. wrote:I wouldn't skimp on contact mics if I were you. Hunt down a Barcus Berry pre-amp. :thumb:
Actually ordered this:

Image

although i didn't get the preamp with it.... is there a reason i would want to? I figured i could just hook it up to my Electronaut M67 preamp and run it through some tubes for color that way too.
Not to get all "you just went full 'what's a VCA ' again" but You need a piezo pre-amp or it's going to sound like shit. It's an impedance thing.

You literally just bought the least essential element. :lol:
:lol: ok so I'll just run my preamp through a VCA. Problem solved!
Advise.. don't drop those pickups.. they are made to be stuck on a piano and not moved around.. if you do drop it and it stops working pop it apart and put the little stick back in place and it will work fine again :idk:

Re: What is in the post? welcome to GWA: gear whores anonymo

Posted: Fri Sep 29, 2017 12:40 am
by codetocontra
MrNovember wrote:
chrisdermo wrote:
codetocontra wrote: Stereo Field arrived yesterday. Sort of underwhelmed so far.
Do go on....
Yeah someone needs to dissuade me a little from that one
Maybe I shouldn't elaborate too much so I can sell mine off first. This just isn't for me and does not live up to my expectations of how I wanted to use it. Had to try it since I loved the idea it offered in demos.

Spent more time with it tonight, here are some random musings:
- Lots of dead areas on the field with certain settings of the input gain and output volume
- Pretty much need 4 fingers on it so you can find and connect two of the hot spots to make the fun noise
- Probably best served as an effect added in post production, not as a live instrument, too inconsistent in making sounds
- Inconsistent with volume of the sounds it creates, some are very quiet and then there will be a spike in volume
- Alters guitar sound in a bad way just passing signal without touching field, as if the tone knob on the guitar turned half down
- Without touching the field, cranking the knobs creates an unpleasant high frequency noise
- Both left and right channels knobs will effect one channel to some degree, at zero it will cut everything on the channel passing sound
- Looks nice, especially the LED under the field
- I don't have anything that generates CV to try that

Re: What is in the post? welcome to GWA: gear whores anonymo

Posted: Fri Sep 29, 2017 2:00 am
by UglyCasanova
codetocontra wrote: - Both left and right channels knobs will effect one channel to some degree, at zero it will cut everything on the channel passing
codetocontra wrote: - Both left and right channels knobs will effect one channel to some degree, at zero it will cut everything on the channel passing
codetocontra wrote: - knobs will effect one
codetocontra wrote:knobs
codetocontra wrote:knobs
codetocontra wrote:knobs

Re: What is in the post? welcome to GWA: gear whores anonymo

Posted: Fri Sep 29, 2017 2:02 am
by codetocontra
Valid.

Re: What is in the post? welcome to GWA: gear whores anonymo

Posted: Fri Sep 29, 2017 2:52 am
by comesect2.0
Okay.. went to go see what Nora got from electro lobotomy as was said but ended up getting a eye sore of salt and cowbells complaints....soo, Davids(e.l.) got a titillating touch pad synth up on etsy at the moment