ilovefuzz.com

New blood?!?!? Oh, you'll do fine here.

Thanks dudes! Looking forward to hanging out here.

I love this simple setup. I just need to add a tremolo.

Are those 2 the King of Tone?

tremolo3 wrote:Are those 2 the King of Tone?

RMA Tetanus I think

latest and hopefully locked in for the year

don't intend to buy anything in 2019 (I know I have said that before)

Routing is a little odd but it's working well
There is a custom patch bay under the board that all the input output cables go to
From the bay it goes Tone Reaper (I like the patch bay because I won't mess up the TR Jack plugging in and out of it) - Dirge Comp - Dirge Slowly melting (Which is insane) - RV5 - Synth Wah - Zoom G3 -for octaves - odd filters and I have a gate patch always on - and pre loops! - (Crybaby is actually a G3 expression pedal that plugs into a patch bay output) - Dirge Acupulco gold (not in the pic) Subdecay echo box- ADD Plague (RAT/SHO/Muskett) Dirge EA - DL10 - Cheap Looper - Dirge Dweller (volume pedal is in the patch bay between the dirt and the looping stuff) and I can plug a jumper in if I ever want to just take one board.
Big black switcher goes to an old first act V-stack combo I usually use the vox models but the others are great. I push that into a randall RG410 wood panel if I need more volume. Overall I am super pumped about the setup. I lost basement space to my 9YO's art studio but my corner of the world is pretty loud!

Mini pedalboard variations. Consists of EHX SuperEgo with EQD Tone Reaper Fuzz in the loop -> Moog Tremolo -> DroloFX Molecular Disruptor -> EQD Dispatch Master Delay -> Caline Pure Sky Timmy clone Overdrive.

New here as a member. Many Google searches have led me here and I've learned a lot. Thought I would share some current gear and perhaps I can give back. Also posted in the 'Let's see your Amp' thread if you want to check that out.

Small board (Pedaltrain Metro 24), used mainly for playing with just a drummer, is currently: Polytune > Bit Commander > Sarcophagus > Rubberneck > 720. Two FS3X make better use of some of the functionality of the Rubberneck and 720. Powered by 1 Spot.

Large board (Temple Audio Trio 28), usually used in a three piece or larger group, is currently: (off board) Cry Baby 535Q > One Control loop (Acapulco Gold > Heretic > Martyr > Sabbra Cadabra) > Plexitube > Trimode > Loopbone (Loop 1 - Super Mod Workstation and expression knob > Delay Workstation) > (Loop 2 - Ditto) > JX-2 Pro (I often run into two amps). Polytune is on the JX-2 tuner out. Powered by two 1 Spots and four Radial 15v supplies. I love the Radial stuff but the power is difficult, at least with four of them.

All zip tied. Some Pedal Toppers on the larger board. I take signal of my amps using Radial JDX units.

Nice, love that double Philly Fuzz action!

Throttleman wrote:New here as a member. Many Google searches have led me here and I've learned a lot. Thought I would share some current gear and perhaps I can give back. Also posted in the 'Let's see your Amp' thread if you want to check that out.

Small board (Pedaltrain Metro 24), used mainly for playing with just a drummer, is currently: Polytune > Bit Commander > Sarcophagus > Rubberneck > 720. Two FS3X make better use of some of the functionality of the Rubberneck and 720. Powered by 1 Spot.

Large board (Temple Audio Trio 28), usually used in a three piece or larger group, is currently: (off board) Cry Baby 535Q > One Control loop (Acapulco Gold > Heretic > Martyr > Sabbra Cadabra) > Plexitube > Trimode > Loopbone (Loop 1 - Super Mod Workstation and expression knob > Delay Workstation) > (Loop 2 - Ditto) > JX-2 Pro (I often run into two amps). Polytune is on the JX-2 tuner out. Powered by two 1 Spots and four Radial 15v supplies. I love the Radial stuff but the power is difficult, at least with four of them.

All zip tied. Some Pedal Toppers on the larger board. I take signal of my amps using Radial JDX units.

Gonna have to do some digging into using the FS3X with the Rubberneck. Easy enough to build my own.

Welcome welcome! That's such a nice setup. Gotta go check out your amps now

odontophobia wrote:Gonna have to do some digging into using the FS3X with the Rubberneck. Easy enough to build my own.

Instant rubbernecking, modulation on/off, and tap tempo + osc (I think)

1st time posting here, love this place

Kill switch in the top?

Yeah it is, not sure how much I like the placement though