Page 2544 of 2752
Re: Let's see your PEDAL BOARD!
Posted: Sun Nov 25, 2018 6:39 pm
by PeteeBee
I like your style. Dirt>Dirt>Dirt>(I assume more dirt?)>Delay with dirt
Re: Let's see your PEDAL BOARD!
Posted: Sun Nov 25, 2018 10:52 pm
by odontophobia
repping this now.
Re: Let's see your PEDAL BOARD!
Posted: Wed Nov 28, 2018 4:40 am
by gila_crisis
here the last iteration my pedalboard.
Re: Let's see your PEDAL BOARD!
Posted: Wed Nov 28, 2018 11:23 am
by JM Charcot
My setup at the moment, for dronesque things.
Everything is routed via the K-Mix, controlled by the good old UC-33 all inputs and outputs can feedback in any sense.
Inputs : Tataki Drone 6, synths, field recordings, Organelle, contact mics, tapes, etc..
FX1 send : Caline Compressor -> EHX Freeze -> OBNE Haunt fuzz (although it has a mix button, I mix it via the OneControl mosquite Blender which is much more flexible) -> Suhr Jack Rabbit Tremolo -> EQD Arpanoid -> Drolo FX Molecular Disruptor -> EQD Dispatch Master -> Fairfield Circuitry Shallow Water -> EQD Afterneath -> Caline Pure Sky (Timmy Clone).
FX2 Send : Strymon El Capistan -> EQD Avalanche Run (this is the stereo touch)
FX3 Send : Organelle input to use with various patches.
JM.
Re: Let's see your PEDAL BOARD!
Posted: Wed Nov 28, 2018 3:56 pm
by PanicProne
Cool!
Very curious what you think of that Tataki Drone 6. Demo on youtube sounds great to me. Just not sure how useful I'd find it.. I ended up getting an EF Drone Thing a while ago and so far feel very underwhelmed with it.
Re: Let's see your PEDAL BOARD!
Posted: Wed Nov 28, 2018 6:13 pm
by comesect2.0
arent you the one i told not to get that

Re: Let's see your PEDAL BOARD!
Posted: Thu Nov 29, 2018 1:56 am
by blackjaw
JM Charcot wrote:My setup at the moment, for dronesque things.
Everything is routed via the K-Mix, controlled by the good old UC-33 all inputs and outputs can feedback in any sense.
Inputs : Tataki Drone 6, synths, field recordings, Organelle, contact mics, tapes, etc..
FX1 send : Caline Compressor -> EHX Freeze -> OBNE Haunt fuzz (although it has a mix button, I mix it via the OneControl mosquite Blender which is much more flexible) -> Suhr Jack Rabbit Tremolo -> EQD Arpanoid -> Drolo FX Molecular Disruptor -> EQD Dispatch Master -> Fairfield Circuitry Shallow Water -> EQD Afterneath -> Caline Pure Sky (Timmy Clone).
FX2 Send : Strymon El Capistan -> EQD Avalanche Run (this is the stereo touch)
FX3 Send : Organelle input to use with various patches.
JM.
I love this, all that reverb and delay probably gets dreamy
Re: Let's see your PEDAL BOARD!
Posted: Thu Nov 29, 2018 4:09 am
by JM Charcot
PanicProne wrote:Cool!
Very curious what you think of that Tataki Drone 6. Demo on youtube sounds great to me. Just not sure how useful I'd find it.. I ended up getting an EF Drone Thing a while ago and so far feel very underwhelmed with it.
I never used the Drone Thing so I can't compare, but for my needs the Drone6 is perfect, lots of low and high ends, filter, power starve, all that makes a lot of tonal and harmonic possibilities.
blackjaw wrote:JM Charcot wrote:My setup at the moment, for dronesque things.
Everything is routed via the K-Mix, controlled by the good old UC-33 all inputs and outputs can feedback in any sense.
Inputs : Tataki Drone 6, synths, field recordings, Organelle, contact mics, tapes, etc..
FX1 send : Caline Compressor -> EHX Freeze -> OBNE Haunt fuzz (although it has a mix button, I mix it via the OneControl mosquite Blender which is much more flexible) -> Suhr Jack Rabbit Tremolo -> EQD Arpanoid -> Drolo FX Molecular Disruptor -> EQD Dispatch Master -> Fairfield Circuitry Shallow Water -> EQD Afterneath -> Caline Pure Sky (Timmy Clone).
FX2 Send : Strymon El Capistan -> EQD Avalanche Run (this is the stereo touch)
FX3 Send : Organelle input to use with various patches.
JM.
I love this, all that reverb and delay probably gets dreamy
Thanks !
Yes, but I still need some dirt to mess the dreamy things..

Re: Let's see your PEDAL BOARD!
Posted: Fri Nov 30, 2018 4:54 pm
by whoismarykelly
Seriously impressed with the Squareplug SP400 plugs. Rewired my right board with them and managed to fit an extra pedal on the bottom row and a larger pedal in place of a narrow one on the back row. Now back to ReVolvering my ReVolvered ReVolver loops

Re: Let's see your PEDAL BOARD!
Posted: Fri Nov 30, 2018 4:58 pm
by comesect2.0
I wanna hear a possessed possess a possessed
Re: Let's see your PEDAL BOARD!
Posted: Fri Nov 30, 2018 5:11 pm
by whoismarykelly
comesect2.0 wrote:I wanna hear a possessed possess a possessed
That would be wild although sometimes its hard to get the Possessed to play nice with other boxes because the window of sound its looking at the take a snippet is so short and randomish so you might not be getting much into that second possessed that gets processed. Although if you had more dry mixed into the later Possesseds (?...) then you might get a cool building chaos. Knob turning would yield a lot of funky stuff too.
I just used the Possessed, a drone fuzz, and a couple PS5s on an intro for a record a week ago and it was a ridiculously fun clutter of notes coming out of the amp.
Re: Let's see your PEDAL BOARD!
Posted: Fri Nov 30, 2018 7:32 pm
by Zork
Are there three Hexe Revolvers on the left board? O_o
Re: Let's see your PEDAL BOARD!
Posted: Sat Dec 01, 2018 3:37 am
by codetocontra
You must be from Australia? Up here we call that the right board.

Re: Let's see your PEDAL BOARD!
Posted: Sat Dec 01, 2018 3:52 am
by comesect2.0
if so, can you debunk the toilet "myth" for me....does it go the opposite way!?
Re: Let's see your PEDAL BOARD!
Posted: Sat Dec 01, 2018 2:46 pm
by JonnyAngle
codetocontra wrote:You must be from Australia? Up here we call that the right board.

G’day, mate! Lesss throw anodder shrimp on tha baaabie