Strange Tales wrote:Through some google-fu, I see you're the one doing the designs, which are absolutely insanely good. That new delay design with the astronaut is one of best I've seen for a pedal. Who do you have that builds your pedals?
Thanks dude. Yeah, it has been great for me. A new art oulet and building a board at the same time. Right now I do "labor trades" with people. I design, etch, paint, and drill enclosures and source all external features. I typically build two and then send them to someone else who does the insides for me. Then we each keep one. Most of the people doing the circuit stuff have been from the madbeans forum, and lot of builders there also come up with original circuits (like the tremolo, phaser, and octave fuzz on the board). Actually, Jero on this forum, did the echo generator circuit. So basically, anyone capable and that can provide me with something I want.
I am slowly trying to start doing the pedal building solo, but it is a learning process. I am working on a fuzz/boost design right now. I would like to eventually do some small runs (4-5 pedals) of stuff to help fund my addiction haha. But until then, the labor trades have been great at getting me what I want for my board and at the same time getting me some great resources (people) to help me with questions as I start doing the electrical stuff myself
What a lovely idea! I am not good enough at building for my work to be worth the trade deal, but I would love to buy one of those enclosures to put my own build in if that's something you would consider. I love your designs and it's beautiful etching.
I wanna have a second whammy so I can have it set to a different setting and use both at once. like, one will constantly be at +2 octaves, and the other would be doing something else, like Harmony mode or detune, or at +1 octave.
Basically, I want to pitch shift my pitch shifting.
ummohyeah wrote:Godspeed rule and no amount of tape would make their pedalboards safe from my cum.
BitchPudding wrote:
No, I'm THE bitch. The only one allowed here.
monkeydancer wrote: What a lovely idea! I am not good enough at building for my work to be worth the trade deal, but I would love to buy one of those enclosures to put my own build in if that's something you would consider. I love your designs and it's beautiful etching.
BitchPudding wrote:I have some stuff I would want rehoused in one of them enclosures too!
Actually, I have been thinking about selling some enclosures lately in order to help fund some of the builds. In the past people have asked and I have always turned the down for the fact that it takes me a long time to do the designs and etching and for the amount of time I would have to charge a fair amount. HOWEVER, I actually have a current discussion of this topic happening over at the madbeans forum and I am thinking about doing some "group buys" on pedal enclosures. By creating one design and doing a batch at once my time commitment would be a lot less and I could offer some enclosures at reasonable prices I think...still doing some figuring and I am having people let me know what kind of pedals/pcbs they would be most interested in.
dminner wrote:Actually, I have been thinking about selling some enclosures lately in order to help fund some of the builds. In the past people have asked and I have always turned the down for the fact that it takes me a long time to do the designs and etching and for the amount of time I would have to charge a fair amount. HOWEVER, I actually have a current discussion of this topic happening over at the madbeans forum and I am thinking about doing some "group buys" on pedal enclosures. By creating one design and doing a batch at once my time commitment would be a lot less and I could offer some enclosures at reasonable prices I think...still doing some figuring and I am having people let me know what kind of pedals/pcbs they would be most interested in.
This ^^^
ILF Equipped
skullservant wrote:You can like whatever you want so long as it makes you happy
Searching for that new sound.
If you can read this, then I'm back?
i was using two for simultaneous polyphonic up & down until some other good polyphonic octaves came out. i love cheating and playing bass and guitar with one rig.
dminner... will you marry me? i want your everything...
pgallagher716 wrote:
dminner wrote:Still need to patch the volume pedal in...ran out of patch cables
I wanna have a second whammy so I can have it set to a different setting and use both at once. like, one will constantly be at +2 octaves, and the other would be doing something else, like Harmony mode or detune, or at +1 octave.
Basically, I want to pitch shift my pitch shifting.
That makes sense I have Whammy HR2 Pitchfactor
I tried to run the HR2 effected out into a bass amp but you can't blend out the dry on that one Gonna try with the whammy
Dminner's board deserves to be requoted for at least 2 more pages
Gunner Recall wrote:This thread is bad and everyone in it should feel bad.
Iommic Pope wrote:This thread is mediocre at best, but I encourage everyone posting in it to feel as awesome as possible.
monkeydancer wrote: What a lovely idea! I am not good enough at building for my work to be worth the trade deal, but I would love to buy one of those enclosures to put my own build in if that's something you would consider. I love your designs and it's beautiful etching.
BitchPudding wrote:I have some stuff I would want rehoused in one of them enclosures too!
Actually, I have been thinking about selling some enclosures lately in order to help fund some of the builds. In the past people have asked and I have always turned the down for the fact that it takes me a long time to do the designs and etching and for the amount of time I would have to charge a fair amount. HOWEVER, I actually have a current discussion of this topic happening over at the madbeans forum and I am thinking about doing some "group buys" on pedal enclosures. By creating one design and doing a batch at once my time commitment would be a lot less and I could offer some enclosures at reasonable prices I think...still doing some figuring and I am having people let me know what kind of pedals/pcbs they would be most interested in.
Well, make sure you advertise on here if it happens, I bet a lot of folks would be into it (I would for sure!).
monkeydancer wrote: What a lovely idea! I am not good enough at building for my work to be worth the trade deal, but I would love to buy one of those enclosures to put my own build in if that's something you would consider. I love your designs and it's beautiful etching.
BitchPudding wrote:I have some stuff I would want rehoused in one of them enclosures too!
Actually, I have been thinking about selling some enclosures lately in order to help fund some of the builds. In the past people have asked and I have always turned the down for the fact that it takes me a long time to do the designs and etching and for the amount of time I would have to charge a fair amount. HOWEVER, I actually have a current discussion of this topic happening over at the madbeans forum and I am thinking about doing some "group buys" on pedal enclosures. By creating one design and doing a batch at once my time commitment would be a lot less and I could offer some enclosures at reasonable prices I think...still doing some figuring and I am having people let me know what kind of pedals/pcbs they would be most interested in.
Well, make sure you advertise on here if it happens, I bet a lot of folks would be into it (I would for sure!).
Well if you guys just want enclosures, I can offer the new reverb one up. The dude building mine as part of a labor trade was a nice enough to say I can offer them to anyone...But they would just be enclosure...I am not building yet (I hope to eventually)
This thing below. But fair warning they are a bit pricey since those giant leds are so damn expensive.
I love them, especially the LEDs! But unfortunately I'm not looking for a reverb so the words stop it from working out. No worries, I can wait for whatever you come up with next if anything, thanks for the offer and explaining all about it.
[/url]
